John Sayers' Recording Studio Design Forum

I've created a new reverb calc adding Owens Corning 2" and 4" - 703 and 705 as options.

you can either add them as full wall covering or use the right hand side option and add the area per wall.

HERE

Enjoy

Cheers
john

hey,

that's a pretty slick program. what kind of reverb time do you want for your control room and live room?

_________________
building a recording studio

That is cool.
When I put in the amount of panels I planned it makes it about.28 - .33 for all frequencys except at 125 hz which was .8 or so. (originally w/o panels was 2.75 all across)

What IS good values for tracking rooms as opposed to mixing rooms?

Tom

_________________
Tom Menikos
T-Mix Studios
Mansfield Tx

There are no hard rules for live room reverb which is why it is called a live room. You can have a huge live room with over 1.5s reverb or a smaller one with less reverb.
Generally the CR must have shorter reverb than the live room but the length is pretty much up to you as long as it's even across the spectrum. I think the recommended RT60 for CR is around .2-.3 seconds.

_________________
-Tomi-
Sound House Finland
www.soundhousefinland.com

Ummmm... no it doesn't. You might want to read again what he said. In fact the treatment he tried meets ETU and EBU specs, with one exception.

Besides, why are you replying to a thread that is nearly three years old?

- Stuart -

_________________
I want this studio to amaze people. "That'll do" doesn't amaze people.