John Sayers' Recording Studio Design Forum
http://www.johnlsayers.com/phpBB2/

Belair Studio - Rome - Italy.
http://www.johnlsayers.com/phpBB2/viewtopic.php?f=11&t=14475
Page 1 of 1

Author:  John Sayers [ Tue Jun 15, 2010 7:25 pm ]
Post subject:  Belair Studio - Rome - Italy.

Alberto has finally had some pictures taken of his studio in Rome.

http://www.johnlsayers.com/Pages/Lombardi.htm

This is a basement studio, the ceiling height is 2.2m (7' 2") apart from a small section in the live room.

Attachment:
31319_1512109567784_1385735902_1409427_2111021_n.jpg

Author:  donal_finn [ Thu Jun 24, 2010 11:11 pm ]
Post subject:  Re: Belair Studio - Rome - Italy.

HMMM YUMMY!

Author:  FRESH-FOX [ Tue Oct 05, 2010 12:09 am ]
Post subject:  Re: Belair Studio - Rome - Italy. --> my questions

very nice.
I'm working right now on my studio in Dresden (pictures in a few days in a special thread) and I aim for a long time, that it should look in a similar way like those amazing Belair studio in Rome. So I have some questions to the community.

1. The slat sizes are not like in SAE Tutorial recommended 100mm, 50mm, 25mm? is it a problem?
2. The slot widths seem to be same overall. is it a problem?
3. Would it be correct if I will use: 170mm, 100mm, 60mm slat width an slot widths of 15mm, 10mm, 5mm?
4. Whats the right way to mount the slats on the studs? with screws??? In the Belair pictures I can't see any screws...and I also don't want to have those ugly screws ;-)
Is it possible to glue them to the studs, or do you have any other suggestions?

Thanks a lot for your help!

Kind regards from Germany

Author:  RomsMaklaet [ Fri Aug 21, 2015 7:25 pm ]
Post subject:  Re: Belair Studio - Rome - Italy.

apart from a small section in the live room.
[SPAM: REMOVED]

Author:  Soundman2020 [ Sat Aug 22, 2015 1:12 am ]
Post subject:  Re: Belair Studio - Rome - Italy.

Quote:
apart from a small section in the live room.
Huh? What is that supposed to mean? Please explain. And please also check the forum rules for posting...

- Stuart -

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/