John Sayers' Recording Studio Design Forum
http://www.johnlsayers.com/phpBB2/

Blue Bear Sound is up
http://www.johnlsayers.com/phpBB2/viewtopic.php?f=11&t=75
Page 2 of 3

Author:  DDev [ Tue Mar 04, 2003 3:20 pm ]
Post subject: 

Hmmm........Might be a bit on the expensive side, but you could stitch braided shield together and give it a good solid earth ground. It would have a shimmering effect.

Author:  John Sayers [ Tue Mar 04, 2003 9:14 pm ]
Post subject: 

after wiring the studio out he'll probably have enough braid strands in the carpet to do just that ;)

cheers
john

Author:  John Sayers [ Mon Mar 10, 2003 3:53 pm ]
Post subject: 

Bruce's second update is up :)

http://johnlsayers.com/Studio/index.htm

cheers
John

Author:  Blue Bear Sound [ Mon Mar 10, 2003 10:47 pm ]
Post subject: 

Thanks John.......! :D

BTW... I noticed the pics aren't the same resolution as what I sent you (they're much more fuzzy) The size of the pics on your site are larger, yet the resolution is lower?!?!

Do you need me to send you files in a different format? (I believe I sent you 50% compressed JPG...)

Author:  John Sayers [ Tue Mar 11, 2003 6:33 am ]
Post subject: 

I didn't resize them at all - but I did lighten some of the shots as they appeared too dark and you couldn't see the detail.
I'll post the originals if you like.

cheers
John

Author:  Blue Bear Sound [ Wed Mar 12, 2003 4:44 am ]
Post subject: 

No big whoop! Just curious.... no need to change 'em! :)

I'll make sure the next batch is bright enough!

Author:  John Sayers [ Wed Mar 19, 2003 4:48 pm ]
Post subject: 

Bruce's update 3 is now up :)

http://johnlsayers.com/Studio/index.htm

cheers
john

Author:  LDQ [ Wed Apr 23, 2003 7:26 am ]
Post subject:  Question on your soffit construction....

Hi Bruce,

Can you tell me for what reason you didn't make the soffit wall... reflective...I can see you placed wood above and below the speaker hole but not on the side. Instead you putted some rockwool...unless you are planing on covering it later???

Let me know...I am in the process of building mine for my studio.

Regards,

luis.

Author:  John Sayers [ Fri Apr 25, 2003 2:50 pm ]
Post subject:  Update 4

Bruce's 4th update is up

http://johnlsayers.com/Studio/index.htm

cheers
John

Author:  Guest [ Sat Apr 26, 2003 1:26 am ]
Post subject:  Re: Question on your soffit construction....

Hey Luis,

The soffit wall is now reflective -- 5/8" wood on the entire front fascia and up the sides to the cream-colored area...

Pics are coming as soon as the builder is done with the finishing!

Bruce


LDQ wrote:
Hi Bruce,

Can you tell me for what reason you didn't make the soffit wall... reflective...I can see you placed wood above and below the speaker hole but not on the side. Instead you putted some rockwool...unless you are planing on covering it later???

Let me know...I am in the process of building mine for my studio.

Regards,

luis.

Author:  John Sayers [ Thu May 01, 2003 10:42 am ]
Post subject:  Update 5

Bruce's 5th update is up

http://johnlsayers.com/Studio/index.htm

cheers
John

Author:  Blue Bear Sound [ Sun May 04, 2003 9:58 pm ]
Post subject: 

And now a 6th update with better pics!

http://www.johnlsayers.com/Studio/Pages/Bluebear6.htm


(thanks again, John!)

Author:  John Sayers [ Wed Jun 04, 2003 12:09 pm ]
Post subject: 

Bruce has posted some new updated pics with all the gear in

http://johnlsayers.com/Studio/index.htm

I'd post this at HR as well but I can't get onto the damn site!!!

cheers
john

Author:  Michael Jones [ Wed Jun 04, 2003 2:05 pm ]
Post subject: 

DAY-UMM!
That looks SOOO nice!!

Author:  Blue Bear Sound [ Wed Jun 04, 2003 10:53 pm ]
Post subject: 

Thanks Michael....

I had some prospective clients by last night to have a tour... they had just come from one of my competitors (whose place I had only seen in photos).

They were blown away - saying my competitor's place couldn't hold a candle to it. It's bigger, more comfortable, and has a much better vibe! (Their words!)

That's encouraging -- nice to know how my place compares to my competitor's from a client perspective!

:)

Page 2 of 3 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/