John Sayers' Design Forum

John Sayers' Recording Studio Design Forum

A World of Experience
Click Here for Information on John's Services
It is currently Mon Dec 10, 2018 3:39 pm

All times are UTC + 10 hours




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Sat Dec 13, 2014 9:49 pm 
Offline

Joined: Thu Dec 11, 2014 5:26 am
Posts: 2
Location: StPetersburg, Russia
Hi everyone, this is my first post.
Digging a forum for couple of days. Tons of info!!!
After reading this http://www.recordingmag.com/resources/r ... l/317.html
and watching some pictures like this
Attachment:
dinotte-studio1.jpg

Decided to make a stands with the ABS tube with sand inside and the fiberglass insulation around the tube like on the picture above.
Two round wooden plates will be attached to the tube and glued to the fiberglass
Can anybody comment this idea?

-Pavel-


You do not have the required permissions to view the files attached to this post.


Report this post
Top
 Profile  
 
PostPosted: Sat Dec 13, 2014 11:31 pm 
Offline
Site Admin
User avatar

Joined: Thu Aug 21, 2008 10:17 am
Posts: 11388
Location: Santiago, Chile
Hi "pavelsx1". Please read the forum rules for posting (click here). You seem to be missing a couple of things! :)

What you show is one way of doing stands, yes. There are other ways too. As long as the stand is very massive (heavy) and strong, an d you have some way of decoupling the speaker from the stand, and it is built so that the acoustic axis of the speaker ends up at 1.2 meters above the floor, then it should be OK. Some people stack bricks, some make their stands from metal filled with sand, some even do concrete.

Those are the major issues: it has to be as heavy as possible, the right height, and decoupled.



- Stuart -

_________________
I want this studio to amaze people. "That'll do" doesn't amaze people.


Report this post
Top
 Profile  
 
PostPosted: Sun Dec 14, 2014 12:01 am 
Offline

Joined: Thu Dec 11, 2014 5:26 am
Posts: 2
Location: StPetersburg, Russia
Thanks for your answer, Stuart. I want my stands be massive plus i want them to be a sound absorbers or even a bass traps. Is this a good idea? And how it can be done correctly?
I also would like to treat my room in near future, but first i decided to start with monitor stands and finding the best listening position.
By the way i have a pair of Focal solo 6be and a Sub6. Do i need to decouple the sub and the floor?


Report this post
Top
 Profile  
 
PostPosted: Tue Dec 30, 2014 4:51 am 
Offline
Site Admin
User avatar

Joined: Thu Aug 21, 2008 10:17 am
Posts: 11388
Location: Santiago, Chile
Quote:
I want my stands be massive plus i want them to be a sound absorbers or even a bass traps.
You could wrap them with thick OC-703, then nice looking fabric over that. That wouldn't do much for bass trapping, since there won't be that much area or volume, and it won't be in the right location in the room, but it would still be useful for adding some general broadband absorption to the room.

Quote:
first i decided to start with monitor stands and finding the best listening position.
Sounds good. If you provide the dimensions of the room, then we can give you a good idea of the best theoretical starting point for playing around with speaker and mix position locations.

Of course, if you really wanted your speakers and room to sound the best they possibly can, then soffit mount them. That also allows you to use the entire area below the speaker as bass trapping... Your speakers are front-ported and can be soffit mounted, so it's worth thinking about...

Quote:
Do i need to decouple the sub and the floor?
Depends on the floor. If it is concrete, stone, ceramic tile, or something rigid and massive like that, then it probably isn't necessary. If it is something resonant, such as a wooden floor, then yes, it would be a good idea to decouple.

- Stuart -

_________________
I want this studio to amaze people. "That'll do" doesn't amaze people.


Report this post
Top
 Profile  
 
PostPosted: Wed Dec 31, 2014 8:36 pm 
Offline

Joined: Tue Dec 30, 2014 5:39 pm
Posts: 3
Nicely explained Stuart...


Report this post
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group