John Sayers' Design Forum

John Sayers' Recording Studio Design Forum

A World of Experience
Click Here for Information on John's Services
It is currently Tue Dec 10, 2019 5:07 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Tue Jun 04, 2019 12:20 am 
Offline

Joined: Sun Jun 02, 2019 5:16 pm
Posts: 1
Hello everybody.

I will try to follow the rules, and I appologies for my english (i'm from france).
I have learned a lot with the help of this forum, and now I would like to make some "tuning" of my listening room.

First, the concerned room :
9m x 3,5m x 2,6m so in feet approx : 29,5 x 9,9 x 6,6.

walls are rock with plaster,and painted (it's an old house)
ceiling is wood slats with plaster on it and between slats, and floor is wood, no carpet (maybe i need to put one?)

the room is "virtually" (no wall) separate in two parts, the music place, and the library / quiet place.
I have made a lot of measurements, with REW, and an apex220, and checked SPL at the problematic frequencies all over the room.

The problem I have (I think) is the 38Hz mode, i suppose if i "kill" this 38Hz, I also kill the 57, 76, 95, and the 133Hz,This one is the most problematic for me because it's not only front to rear wall, but also right to left wall.


I don't have a lot of space, there is no space between speakers and front wall (but i think i can find around 3" to 4" if it's necessary), and I can't make very big bass traps because it's a living room, not a studio (my wife say that :) )

There is a door on the left, just near the angle formed by the walls (45cm from the front wall)
And there is a windo just on the right of the listening spot.

I will try to make a plan if necessary.



I plan to make all the needed treatment with the minimum money (i'm not the only one i think), all DIY.

What do you think I have to make first? absorber on ceiling? superchunk in corners (but they will be mini superchunk)?
I think I will try cotton fiber, I don't like glass fiber.


impossible to upload mdat on the forum.

https://www.dropbox.com/s/snv1tihw53cpz ... .mdat?dl=0


Thanks.


You do not have the required permissions to view the files attached to this post.


Report this post
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: Google [Bot] and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group