John Sayers' Design Forum

John Sayers' Recording Studio Design Forum

A World of Experience
Click Here for Information on John's Services
It is currently Tue Aug 11, 2020 2:15 pm

All times are UTC + 10 hours




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Tue Jun 02, 2020 5:03 am 
Offline
User avatar

Joined: Fri Feb 22, 2008 10:36 am
Posts: 106
Location: Nieuw-Buinen, The Netherlands
I've been on Google, and this forum for the past months searching for duct line for my baffle boxes.
On GS I've seen Rod Gervais advicing Linacoustic R-300 as lining for inside the baffle box.

Unfortunatelly that's not available here. So I had to go through a ton of searching to find something suitable available here in Europe and even preferably in the Netherlands.

I've found the products of Merford, and apparently their Akotherm Basic is suitable for lining baffle boxes, according to them.
The question now is, is the acoustical performance good enough for my baffle boxes?

Here's a PDF link (https://www.akoestiekwinkel.nl/pub/medi ... _d40_1.pdf), it's in Dutch so the specs are listed in the screenshot underneath.

D40 = Density 40kg/m3
the 25 after it is thickness in MM

From the info I gathered, and compared to other lining, this seems to be ok, but I just want to make sure I'm not making any mistakes here.


You do not have the required permissions to view the files attached to this post.

_________________
http://www.myspace.com/samuelstudiosnl
Facebook Page


Report this post
Top
 Profile  
 
PostPosted: Wed Jun 03, 2020 2:49 am 
Offline
User avatar

Joined: Thu May 03, 2018 10:44 pm
Posts: 35
Location: South of England, UK
I used this one myself, was recommended on here by someone;

https://www.advancedacoustics-uk.com/Cl ... Foam-Panel


Report this post
Top
 Profile  
 
PostPosted: Wed Jun 03, 2020 3:07 am 
Offline
User avatar

Joined: Fri Feb 22, 2008 10:36 am
Posts: 106
Location: Nieuw-Buinen, The Netherlands
atomicus wrote:
I used this one myself, was recommended on here by someone;

https://www.advancedacoustics-uk.com/Cl ... Foam-Panel


Yup, I read through your thread. Looking at the numbers, my stuff would be also good for this.

Thanks, you already have your ventilation finished?

_________________
http://www.myspace.com/samuelstudiosnl
Facebook Page


Report this post
Top
 Profile  
 
PostPosted: Wed Jun 03, 2020 11:45 am 
Offline
User avatar

Joined: Thu May 03, 2018 10:44 pm
Posts: 35
Location: South of England, UK
Funky Animal wrote:
atomicus wrote:
I used this one myself, was recommended on here by someone;

https://www.advancedacoustics-uk.com/Cl ... Foam-Panel


Yup, I read through your thread. Looking at the numbers, my stuff would be also good for this.

Thanks, you already have your ventilation finished?


It's easy stuff to work with I found. Not sure if yours is same, but I imagine will be similar.

My baffle boxes are all done, but yet to actually get everything in place and up and running. Hoping to get it all done in next month or so.


Report this post
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 84 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group