John Sayers' Recording Studio Design Forum
http://www.johnlsayers.com/phpBB2/

new member, HERE IS MY NEW CLOUD
http://www.johnlsayers.com/phpBB2/viewtopic.php?f=3&t=8276
Page 1 of 1

Author:  todmil [ Sun Feb 25, 2007 4:23 pm ]
Post subject:  new member, HERE IS MY NEW CLOUD

IM new to this forum. So , i wanted to, if you will ..devirgin myself....here is pics of the cloud I just built for my room...... its a trapezoid 9feetx6 feet. with 2 layers of 1inch 703. fitted to shape with acoustic fabric.

Author:  tmix [ Mon Feb 26, 2007 12:26 am ]
Post subject:  Nice

That is pretty dang nice!
I like the light mounting, I am going to do something similar myself , but my cloud is smaller ( put up in three sections) and the lights will be fastened to the side member.

That is a pretty nice job of putting on the fabric.

Tom

Author:  ricochet2182 [ Fri Dec 05, 2008 10:08 am ]
Post subject:  Re: new member, HERE IS MY NEW CLOUD

How did you hang your cloud and how did you wire the light into it? Do you think this is something I could do in an apartment without too much damage?

Author:  xSpace [ Fri Dec 05, 2008 10:33 am ]
Post subject:  Re: new member, HERE IS MY NEW CLOUD

Which pair of opposite sides are parallel? Looks like both to me? You sure that's not a rectangle ;)?

Author:  mrvinyl [ Mon Jan 05, 2009 10:01 am ]
Post subject:  Re: new member, HERE IS MY NEW CLOUD

I'd be interested to know how you hung your cloud?

Author:  todmil [ Tue Dec 08, 2009 8:08 am ]
Post subject:  Re: new member, HERE IS MY NEW CLOUD

I completely forgot I posted this! Never to late to answer questions.
First I placed the cloud on the ground, positioning it underneath where I wanted it to hang! Then I used the plumb line technique to mark anchor holes in the ceiling! Anchored cup hooks into the ceiling. The front is dropped down with S Hooks.

The front and back are parallel! The front is next to the window in the first picture.

I fastened the light to one of the cross beams. I put the fabric on first, then cut a few holes in the fabric for the screws and wire to drop through. Feel free to ask anything! I will try and answer this decade! :D

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/