John Sayers' Design Forum

John Sayers' Recording Studio Design Forum

A World of Experience
Click Here for Information on John's Services
It is currently Sun Nov 28, 2021 12:24 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: "inside out" Ceilings
PostPosted: Mon Oct 25, 2021 2:52 pm 
Offline

Joined: Sun Oct 10, 2021 8:01 pm
Posts: 2
Location: United Kingdom
Hi Everyone, first post here.

I've been reading through lots of topics as I'm in the early planning stages of my build. One thing that's conme up a few times is the "inside out" wall/ceiling design. This was a new idea to me, and as I have a limited space a very interesting one.

One thing I've not been able to work out or find the answer to with a search is exactly how its constructed (particularly the ceiling). Mostly, how is the leaf attached to the frame? Is it attached from above, or are individual pieces set indise the studwork and fixed from below?

Sorry if this seems a daft question, as I said, I'm still new and learning!

Many thanks.


Report this post
Top
 Profile  
 
PostPosted: Tue Oct 26, 2021 3:33 am 
Offline
Senior Member

Joined: Tue Mar 25, 2008 3:31 am
Posts: 589
Location: Cork Ireland
Welcome here. Never built one. But I have frequently recommended omitting or removing plasterboard, exposing the beams and the void leading up to the floor above. Fill this with light fibre, cover with fabric. Could you clarify what you mean by 'leaf' and 'frame'

_________________
DanDan FitzGerald MIOA MAES
http://www.irishacoustics.com
http://www.soundsound.ie


Report this post
Top
 Profile  
 
PostPosted: Tue Oct 26, 2021 5:20 am 
Offline

Joined: Sun Oct 10, 2021 8:01 pm
Posts: 2
Location: United Kingdom
Hi DanDan, probably not using the correct terms yet (still learning!) by frame I mean the joists/studwork and by leaf I mean the osb/plasterboard (i'm certain I used the wrong term there!)


Report this post
Top
 Profile  
 
PostPosted: Tue Oct 26, 2021 2:00 pm 
Offline
Senior Member

Joined: Sun Mar 02, 2014 8:42 am
Posts: 642
Location: Wales, UK
It can be done both ways...

If you have adequate height above the proposed ceiling then put the beams across on a ledger attached to the wall studs, then put the boards on top of the beams and nail from above and below.

If you do not have enough space to realistically do that then you can build ceiling modules, this is where you put your beams up with some cross members, then on the ground build some ceiling modules with more timber framing and fix the plasterboard layers to the top of this framing, then lift the whole module into the space between the beams above and attach the module framing to the beams through the sides.

There are quite a few threads with pictures of this latter method if you try and search.

_________________
Paul


Report this post
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: Majestic-12 [Bot] and 22 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group