John Sayers' Recording Studio Design Forum
https://www.johnlsayers.com/phpBB2/

Mounting Bass trap slats
https://www.johnlsayers.com/phpBB2/viewtopic.php?f=3&t=22709
Page 1 of 1

Author:  EricHarrington [ Fri Feb 26, 2021 1:04 pm ]
Post subject:  Mounting Bass trap slats

I am using 2 - 5" 3/4" Ipe wood slats with 1/4" gaps in my MDF corner bass trap cabinet and I wanted to know, do I mount them hard, i.e. a hard glue and screw, or do I mount them soft ie. velcrow,. or with Silicone caulk etc. Should it be damped or ridged I guess is the real question.

This forum has been such a help I am blown away. Pics soon to follow.

Author:  gullfo [ Sat Feb 27, 2021 2:48 am ]
Post subject:  Re: Mounting Bass trap slats

if you create a frame using two vertical runners for the slats that fit into the cabinet, you hard mount the slats to the runners and then attach as a unit to the cabinet in a few places using some screws.

Author:  EricHarrington [ Sat Feb 27, 2021 4:25 am ]
Post subject:  Re: Mounting Bass trap slats

Thank you. I figured. I actually glued and screwed the runner, (I overbuild everything.)With 3/4" slats at 11" (2 5x5) 5.5" and 3.5" and 1.5" with 1/4" gaps it pretty much cover 60-500! Thanks so much for this incredible resource..

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/